

IIT Gandhinagar Project Engineer (Photonics Device Design and Development) Recruitment 2026 — SAMARTH, 1 Post
IIT Gandhinagar R&D Office advertisement SPON/10455/Advt0378 (18 Nov 2026) invites applications for one temporary Project Engineer (Photonics Device Design and Development) in the SAMARTH semiconductor hub. Ph.D. or M.Tech./M.S. with two years of relevant post-qualification experience; 55% in Classes 10/12 and 60% from graduation onward. Consolidated pay ₹60,000–₹1,25,000/month including HRA. Online last date 5 Dec 2026.
About the Recruiting Organization
Organization information attached to this recruitment record.

About this Recruitment
Recruitment-specific overview from the published record.
IIT Gandhinagar Project Engineer (Photonics) Recruitment 2026 — SAMARTH Semiconductor Research Project
The Indian Institute of Technology Gandhinagar (IITGN), Research & Development Office, has advertised one temporary Project Engineer (Photonics Device Design and Development) position in its Department of Electrical Engineering. The appointment supports the Silicon and Advanced Semiconductor Manufacturing Research and Training Hub (SAMARTH) under Professor Nihar Ranjan Mohapatra, the project’s Principal Investigator. The original recruitment notice is SPON/10455/Advt0378, dated 18 November 2026, and online applications close on 5 December 2026.
This vacancy is aimed at applicants who can bridge optical-device design, nanofabrication and practical characterization rather than a generic IT or maintenance engineer. Its advertised compensation is ₹60,000–₹1,25,000 per month, consolidated, fixed according to qualification and experience. Crucially, this already includes HRA, and the notice lists separate HRA as NIL. The appointment starts for one year and may be extended, subject to satisfactory performance, only up to the project's completion.
🧭 Recruitment essentials
| Particular | Details in the IIT Gandhinagar notice |
|---|---|
| Recruiting institution | Indian Institute of Technology Gandhinagar, Research & Development Office |
| Advertisement number | SPON/10455/Advt0378 |
| Official issue date | 18 November 2026 |
| Position | Project Engineer (Photonics Device Design and Development) |
| Number of vacancies | 1, no category-wise reservation breakdown notified |
| Project | Silicon and Advanced Semiconductor Manufacturing Research and Training Hub (SAMARTH) |
| Department | Electrical Engineering |
| Principal Investigator | Prof. Nihar Ranjan Mohapatra |
| Monthly remuneration | ₹60,000–₹1,25,000, consolidated including HRA; separate HRA NIL |
| Initial tenure | One year, extendable on satisfactory performance up to project completion |
| Essential degree | Ph.D./equivalent OR M.Tech./M.S./equivalent with two years' qualifying experience |
| Academic marks | At least 55% in both Class 10 and Class 12; 60% from graduation onwards (or equivalent grade) |
| Application method | Online, IITGN Project Staff Recruitment Portal |
| Last date | 5 December 2026; closing hour not specified in the notice |
| Age limit / application fee | Not specified in this two-page advertisement |
| Exam / interview date | Not announced in this advertisement |
🔬 Why this particular position matters
Photonics engineers develop optical devices by combining electromagnetic simulation with precision fabrication and laboratory measurement. This project connects such engineering with a semiconductor-oriented research and training hub. The person recruited will lead the design, simulation, fabrication and optical characterization of optical metasurfaces, and help the SAMARTH programme's training activities and nanofabrication centre. It is a project-specific engineering role, not an open-ended permanent IIT faculty or regular Group A/B establishment appointment.
🎓 Exact essential qualification: two alternative pathways
The notice deliberately offers two distinct entry routes. Candidates need to satisfy one of these routes, not both:
Route A — doctoral qualification. A Ph.D. or equivalent in an appropriate discipline with a very good academic record throughout. The notice does not add a universal two-year experience requirement to this Ph.D. route.
Route B — postgraduate engineering/research qualification with experience. A relevant M.Tech., M.S. or equivalent plus at least two years of experience after obtaining that qualification in teaching, research, industry or design in an organization of repute. Two years of general employment completed before the qualifying M.Tech./M.S. must not be counted as two years of post-qualification experience.
Marks are a common condition for both routes. The advertisement demands at least 60% (or equivalent grade) from graduation onwards and 55% (or equivalent grade) in Class 10 and Class 12. Applicants who hold the right degree but fall below these academic thresholds should not ignore the marks requirement. The institute may use higher screening cutoffs and merely meeting the listed minimum does not guarantee being shortlisted.
📊 Minimum academic percentage thresholds specified by IIT Gandhinagar
| Academic stage | Minimum percentage |
|---|---|
| Class 10 | 55 |
| Class 12 | 55 |
| Graduation and higher degrees | 60 |
These are qualification thresholds, not marks awarded in a recruitment examination and not a prediction of a merit cutoff. Equivalent grades are accepted subject to the institute's rules. The advertisement does not identify a preferred branch list beyond requiring an appropriate discipline; candidates should assess relevance to the photonics duties rather than assume that every engineering programme qualifies.
🧪 Five desirable skill clusters — and how they connect to the work
The desirable requirements are specific but are not substitutes for the essential degree, experience (where applicable), and marks.
1. Thin-film deposition
Hands-on experience with sputtering, electron-beam evaporation, chemical vapour deposition (CVD) and atomic layer deposition (ALD) is valued. The selected engineer will work on fabrication workflows where film quality and deposition technique materially affect optical device response.
2. Lithography and nanofabrication
Familiarity with electron-beam lithography, photolithography, etching and micro/nanostructure fabrication will be useful for creating optical metasurfaces. Candidates should be prepared to explain which fabrication steps they have performed and how they handled process repeatability and experimental constraints.
3. Material characterization
The advertisement names scanning electron microscopy (SEM), atomic force microscopy (AFM), profilometry and thin-film characterization techniques. These methods help verify that fabricated structures resemble the intended design. Lab experience here is especially relevant to an experimental device-engineering position.
4. Optical characterization
Experience with spectrometry, reflectance/transmittance measurements, lasers, detectors and optical bench setups is desirable. The job specifically includes spectroscopy and polarization-dependent measurements, making optical metrology an important part of its daily work.
5. Electromagnetic simulation
Knowledge of Lumerical, COMSOL or equivalent software for designing and modelling optical metasurfaces is preferred. The engineer is expected to connect optical simulations to fabricated structures and then compare experimental results against the model, iterating the design as needed.
🛠️ Actual project responsibilities
The official two-page notice describes six closely related responsibilities. A successful applicant can expect to:
- Design and simulate optical nanostructures and optimize metasurface responses using Lumerical, COMSOL or equivalent electromagnetic tools.
- Develop nanofabrication workflows using electron-beam or optical lithography, thin-film deposition and etching.
- Characterize fabricated structures with SEM, AFM and related microscopy techniques.
- Measure optical characteristics, including reflectance, transmittance, spectroscopy and polarization-dependent behaviour.
- Correlate experiment with simulation, troubleshoot discrepancies and refine fabrication/design choices.
- Support SAMARTH training and laboratory work, including operation of the computational photonics laboratory and assistance to the nanofabrication centre.
These tasks go beyond a narrow software-only simulation role; the advertised work explicitly covers both computational design and hands-on laboratory engineering. Applicants may find it useful to prepare project reports, simulation results, photographs or technical summaries demonstrating relevant skills, if they have such records. The notice does not prescribe an additional mandatory portfolio format.
💰 Understand the ₹60,000–₹1,25,000 monthly remuneration correctly
The declared figures are the lower and upper endpoints of a consolidated monthly remuneration range, not a guaranteed salary for all selected applicants and not a 7th CPC pay matrix. IITGN states that the precise remuneration depends on qualification and experience.
📊 IITGN Project Engineer consolidated monthly pay range endpoints
| Consolidated remuneration endpoint | INR per month |
|---|---|
| Lower stated amount | 60000 |
| Upper stated amount | 125000 |
Because remuneration includes HRA and the table explicitly says HRA: NIL, adding a separate housing allowance on top of the stated amount would be incorrect. The advertisement supplies no assured take-home figure, annual increment, pension benefit or detailed tax-deduction schedule. Do not compare this directly with an IIT faculty's regular basic-pay scale.
📅 Dates, age, fees and recruitment process
The notification is dated 18 November 2026, and the IITGN Staff Openings list carries the same posting date. The last date is 5 December 2026. No precise final submission hour appears in the PDF; applicants should submit comfortably before the portal closes. The notice does not announce an application correction period, written examination date, interview schedule, or a complete selection-test pattern.
The document also does not state a numerical age ceiling or application fee. That absence is not proof that the fee is zero or that all ages are unconditionally eligible. The institute warns that meeting the minimum requirements does not guarantee shortlisting or appointment; it may use a higher cutoff and reserves the right not to call an applicant for a selection test or not to fill the position. Any subsequent screening or selection instructions should therefore be checked on the official portal.
📝 How to apply — official IIT Gandhinagar portal
Step 1: Open the IIT Gandhinagar Project Staff Recruitment Portal and complete or access your applicant profile using the current portal instructions.
Step 2: Identify the vacancy by Project Engineer (Photonics Device Design and Development) and notice SPON/10455/Advt0378. Do not confuse it with IITGN's separate Project Engineer advertisements for semiconductor safety, ESD device development or other projects.
Step 3: Enter the correct education details and, if applying through the M.Tech./M.S. route, identify two years of relevant post-qualification experience. Have evidence of the Class 10, Class 12 and graduation-onward percentage requirements available.
Step 4: Provide the information and documents the actual application form requests. Keep an accurate copy of the submitted application/acknowledgement for your records. The two-page notice itself does not specify a separate postal hard-copy submission requirement.
Step 5: Complete submission by 5 December 2026 and monitor the institute's official career page and applicant portal for any subsequent instructions. The PI contact is Prof. Nihar Ranjan Mohapatra, Department of Electrical Engineering, nihar@iitgn.ac.in. The PDF lists this contact and asks applicants to mention the PI's name and mail ID; it does not say that simply emailing a CV replaces the online portal application.
❓ Applicant questions
Is this a permanent IIT Gandhinagar engineering post? No. The advertisement expressly calls it temporary, initially for one year, with possible extension based on performance up to the completion of the SAMARTH project.
Does every applicant need a Ph.D.? No. The notice allows M.Tech./M.S./equivalent plus at least two years of post-qualification experience as an alternative to the doctoral route.
Does a Ph.D. applicant automatically need two years of additional experience? The two-year requirement is explicitly attached to the M.Tech./M.S. pathway. The advertised doctoral route instead asks for a relevant Ph.D. and a strong academic record.
Is ₹1,25,000 the guaranteed monthly take-home amount? No. It is the upper end of the consolidated remuneration range, including HRA, with the actual amount determined by qualification and experience.
Is the examination or interview date fixed? No selection-test/interview date or pattern is specified in this notice. IITGN may shortlist candidates and decide whom to call for any selection test.
🔗 Official recruitment references
- IIT Gandhinagar Staff Openings — posting and original PDF
- Original N-EE.pdf linked by IIT Gandhinagar
- IITGN Project Staff Online Application
Applicants should rely on the institute's official notice and portal for any amendment or final selection instructions.
Post-wise Vacancies
Open a post to view qualification, experience, age, salary, location, responsibilities and post-specific instructions.
1 vacanciesProject Engineer (Photonics Device Design and Development)
Qualification: EITHER a Ph.D. (or equivalent) in an appropriate discipline with a very good academic record OR an M.Tech./M.S. (or equivalent) in an appropriate discipline plus at least two years of qualifying post-degree experience in teaching/research/industry/design at a reputed organization. For BOTH routes, at least 60% or equivalent grade from graduation onwards and at least 55% or equivalent in Class 10 and Class 12 are essential. The academic pathways are alternatives; do not read both listed education records as simultaneous degree requirements.Age: Not specifiedPay: ₹60,000 – ₹1,25,000 / month
Project Engineer (Photonics Device Design and Development)
EITHER a Ph.D. (or equivalent) in an appropriate discipline with a very good academic record OR an M.Tech./M.S. (or equivalent) in an appropriate discipline plus at least two years of qualifying post-degree experience in teaching/research/industry/design at a reputed organization. For BOTH routes, at least 60% or equivalent grade from graduation onwards and at least 55% or equivalent in Class 10 and Class 12 are essential. The academic pathways are alternatives; do not read both listed education records as simultaneous degree requirements.
Required: No · Description: CONDITIONAL: Relevant M.Tech./M.S. or equivalent applicants require at least 2 years of post-qualification experience in teaching, research, industry or design in an organization of repute. Ph.D./equivalent applicants do not have a separately notified universal minimum-years requirement. The Institute may use higher criteria for shortlisting.
Project Engineer — Photonics Device Design and Development
One temporary project position in IIT Gandhinagar's Electrical Engineering Department for the SAMARTH — Silicon and Advanced Semiconductor Manufacturing Research and Training Hub under Prof. Nihar Ranjan Mohapatra. The engineer will lead simulation, fabrication and optical characterization of metasurfaces, supporting both laboratory research and training programmes.
Essential eligibility (either route): (1) Relevant Ph.D. or equivalent with a very good academic record throughout; OR (2) Relevant M.Tech./M.S. or equivalent AND at least two years of post-qualification teaching, research, industry or design experience at a reputed organization. The minimum 2 years is not specified for the Ph.D. pathway. In addition, candidates must have at least 60% or equivalent grade from graduation onwards and 55% or equivalent in Classes 10 and 12.
Desirable experience: thin-film processes (sputtering/e-beam evaporation/CVD/ALD), nanofabrication through electron-beam or photolithography and etching, SEM/AFM/profilometry, spectroscopy and optical benches, as well as Lumerical/COMSOL-based electromagnetic simulation.
Work: create and optimize metasurface optical designs, carry out nano/microfabrication workflows, characterize materials and optical properties, correlate the lab measurements with simulations, and support the computational photonics laboratory and SAMARTH centre training.
Pay: ₹60,000–₹1,25,000 per month consolidated including HRA; separate HRA is NIL. Salary within the band depends on qualification and experience. Initial term: one year, extendable on satisfactory performance up to the project completion date. The original advertisement does not state an age ceiling, fee, selection-test date or interview timetable.
Apply online by 5 December 2026 through the IITGN Project Staff Portal. Identify notice SPON/10455/Advt0378 and use the exact post title; this is not the older IITGN ESD Project Engineer notice. Professor Nihar Ranjan Mohapatra (EE; nihar@iitgn.ac.in) is the listed PI contact. An email alone is not the application route.
Lead optical metasurface design, simulation, nanofabrication and optical device characterization; support semiconductor research, experimental development, training activities and laboratory operation under SAMARTH.
- Design and optimize optical nanostructures and metasurfaces using electromagnetic simulation tools such as Lumerical or COMSOL.
- Develop fabrication processes using electron-beam lithography, photolithography, thin-film deposition and etching.
- Characterize fabricated nanostructures using SEM, AFM and other material microscopy tools.
- Perform reflectance, transmittance, spectroscopy and polarization-dependent optical measurements.
- Compare experimental measurements against simulations to optimize device designs and fabrication processes.
- Assist SAMARTH training programmes, nanofabrication-centre activities and the computational photonics laboratory.
- Apply online at the official IIT Gandhinagar Project Staff Recruitment Portal by 5 December 2026; a closing hour is not specified in the advertisement.
- Choose the Project Engineer (Photonics Device Design and Development) position under SPON/10455/Advt0378, not an earlier IITGN Project Engineer position.
- If applying with M.Tech./M.S., substantiate at least two years of relevant post-qualification teaching, research, industry or design experience.
- Check that both Class 10 and Class 12 marks meet the 55% minimum and every degree from graduation onward meets 60%, or accepted equivalent grades.
- The notice lists Prof. Nihar Ranjan Mohapatra, Department of Electrical Engineering, nihar@iitgn.ac.in as PI contact; follow application-portal instructions rather than applying solely by email.
One vacancy announced; the two-page advertisement does not provide a category-wise vertical reservation roster or a horizontal quota allocation for this position.
Eligibility & Qualification
Recruitment-level qualifications and eligibility rules. Post-specific conditions are also shown inside each vacancy card.
Class 12 minimum academic marks
At least 55 percent marks or equivalent grade in Class 12.
Graduation onward minimum academic marks
At least 60 percent marks or equivalent grade from graduation onwards.
Class 10 minimum academic marks
At least 55 percent marks or equivalent grade in Class 10.
One of two eligible degree pathways (OR)
EITHER a relevant Ph.D./equivalent with a very good academic record, OR relevant M.Tech./M.S./equivalent WITH two years of post-qualification experience. These are alternatives, not a combined two-degree requirement.
Conditional experience for M.Tech./M.S. applicants
Applicants choosing the M.Tech./M.S. alternative must possess at least two years of relevant experience AFTER obtaining that degree in teaching, research, industry or design at an organization of repute. This two-year minimum is not a universal add-on to the Ph.D. alternative.
Relevant discipline and academic record
The qualification must be in an appropriate discipline for photonics/metasurface design and development, with a very good academic record throughout. Exact exhaustive discipline list is not provided.
Desirable thin-film, nanofabrication and optical characterization skills
Hands-on thin-film deposition, lithography, SEM/AFM, optical measurement, and Lumerical/COMSOL-type simulation experience are desirable, not required alternatives to an essential degree.
Salary & Pay Scale
Post-wise salary, stipend or pay-matrix information.
Consolidated monthly INR 60,000–125,000 inclusive of HRA, separate HRA NIL. Actual offer within this band subject to qualification and experience; temporary project appointment.
Selection Process
Selection stages in the order configured for this recruitment.
Eligibility screening and shortlisting
The institute states that merely meeting the minimum eligibility does not guarantee shortlisting or appointment, may apply a higher cutoff, and may decide whether to call an applicant for a selection test. A final selection-test/interview schedule and pattern are not published in this advertisement.
Important Dates
Application and recruitment milestones published with this job.
Date printed in the first paragraph/heading of the original two-page IITGN notice and shown on institute Staff Openings page.
Original IITGN advertisement specifies 5 December 2026 but does not provide an hour or minute cutoff.
Official Links & Resources
Application links, notification documents and verified sources in one place.
Official actions
Verified sources
सरकारी नौकरी, भर्ती, परीक्षा और career information को सरल, सटीक और उपयोगी रूप में समझाने पर केंद्रित