National Institute of Technology Meghalaya logo
National Institute of Technology MeghalayaNEWCheck application status

NIT Meghalaya Guest Faculty Recruitment 2026 — 2 Mechanical Engineering Posts (Machine Design / Manufacturing)

NIT Meghalaya advertisement NITMGH/ES/G-F/ME/2026-27/1568, issued 20 November 2026, invites email applications for two temporary Mechanical Engineering Guest Faculty positions in the combined Machine Design / Manufacturing specialization. Ph.D. completed OR thesis submitted is the stated educational requirement. Email the institute form (PDF) and prescribed supporting scans to hod.me.office@nitm.ac.in by 13 December 2026, 11:59 pm. Interview tentatively 18 December; appointment 25 January–4 June 2027. Conditional consolidated pay may be ₹65,000 per month or as per institute rules.

NITMGH/ES/G-F/ME/2026-27/1568Posted 20 Nov 202623 days left
Total vacancies
2
Last date
13 Dec 2026 ? 11:59 PM
Application mode
Offline
Job location
Meghalaya
Organization profile

About the Recruiting Organization

Organization information attached to this recruitment record.

National Institute of Technology Meghalaya logo
Recruiting AuthorityRecruiting authority

National Institute of Technology Meghalaya

AutonomousInstituteCentralHigher Education
Organization code
NIT-MGH
Official jobs
View all jobs
Official website
Sarkari Sapna

About this Recruitment

Recruitment-specific overview from the published record.

NIT Meghalaya Mechanical Engineering Guest Faculty Recruitment 2026 — 2 Positions

Advertisement: NITMGH/ES/G-F/ME/2026-27/1568, issued 20 November 2026
Recruiter: National Institute of Technology Meghalaya (NIT Meghalaya), Department of Mechanical Engineering
Advertised specialization: Machine Design / Manufacturing
Vacancies: 2 Guest Faculty positions
Apply by email: 13 December 2026, 11:59 p.m.
Interview: 18 December 2026, tentative and subject to change
Contract term: 25 January to 4 June 2027
Remuneration: May be ₹65,000 consolidated per month, or as per institute rules

This is a short-term academic appointment to the Mechanical Engineering department at NIT Meghalaya, Sohra. The employer seeks doctoral-level candidates for Machine Design / Manufacturing and will consider a Ph.D. completed or a Ph.D. thesis submitted, as expressed in the recruitment notice. The application is not through the institute's general faculty recruitment portal: the advertised route is submission of the prescribed application to the departmental email address. Read the dates and qualification status carefully before applying, particularly if your doctorate has not yet been formally awarded.

📌 Vacancy structure: one combined departmental requirement

Advertised departmentAdvertised specializationVacanciesEssential qualification
Mechanical EngineeringMachine Design / Manufacturing2Ph.D. completed or thesis submitted
TotalCombined specialization line2—

NIT Meghalaya lists two positions in one recruitment row. It does not divide the count into separate numbers for Machine Design and Manufacturing, and does not provide a category-wise roster for UR, SC, ST, OBC, EWS or horizontal reservations in this announcement. Consequently, it would be inaccurate to label either specialty as having exactly one reserved place, or to attribute a reservation count to these two posts without an additional official notice.

How applicants should read the specialization line: A candidate working in Machine Design and one working in Manufacturing are both concerned with the advertised area, but the notice does not create two separately numbered vacancies or separate application codes. Eligibility and shortlisting ultimately depend on the institute's review of the individual academic record against its departmental needs.

🏛️ The employing institution and nature of appointment

The recruiting institute is National Institute of Technology Meghalaya, not the Ministry of Education, a research funding programme or a private contractor. The position is specifically a Guest Faculty engagement in the Department of Mechanical Engineering. The appointment period printed by the institute runs from 25 January 2027 through 4 June 2027, and the announcement explicitly describes it as purely temporary / contractual.

The department operates at the institute's Saitsohpen, Sohra, East Khasi Hills, Meghalaya campus. Its official department page describes B.Tech., M.Tech. and Ph.D. academic activity in Mechanical Engineering. That background helps candidates understand the academic setting; however, the recruitment notice does not promise a particular course, lecture load, research grant, rank equivalent to permanent Assistant Professor, or permanent appointment. Those particulars should not be presumed from the institute's general programme descriptions.

🎓 Essential academic eligibility — two alternative doctoral statuses

The vacancy notice's essential requirement is Ph.D. (completed or thesis submitted) in the advertised Machine Design / Manufacturing specialization. The word or is important: these are alternative doctoral statuses, rather than two separate requirements that every applicant must meet.

Candidate's doctoral positionWhat the advertised requirement means
Ph.D. already awardedMay meet the doctoral-status requirement if the discipline/specialization fits the advertised Mechanical Engineering field
Ph.D. thesis submitted, degree not yet awardedThe express thesis-submission alternative may be considered; accurate institutional evidence of submission is important
Research work ongoing, thesis not yet submittedThe issue notice does not list mere Ph.D. enrolment as an alternative to completed doctorate or submitted thesis
Degree in an unrelated fieldThe notice does not state that every doctorate, regardless of specialization, qualifies

Documentary distinction: An award letter or degree certificate is evidence of a conferred Ph.D.; a thesis submission acknowledgement or university record is relevant where the applicant relies on the alternate submission route. Applicants should use the exact documentation required by the linked institute application form. This practical distinction does not create any extra mandatory certificate beyond what the institute requests.

The 20 November announcement does not set a numerical minimum percentage for Bachelor's or Master's degrees, a fixed GATE/NET threshold, an explicit number of prior teaching years, or a numerical upper age limit. It also does not publish a nationality/domicile preference or a separate relaxation table. These absences must not be mistaken for a general declaration that all possible conditions are waived: the institute says applications will be scrutinised according to its norms and requirements.

Mechanical Engineering context: how the specializations relate to the department

NIT Meghalaya's official Mechanical Engineering department page, separate from the vacancy notice, identifies research activity that includes manufacturing processes, micro-manufacturing, advanced materials, design and control, industrial engineering and related areas. It also lists facilities such as its Theory of Machine, Metrology and Instrumentation, Advanced Manufacturing and Additive Manufacturing laboratories.

This context is relevant to a doctoral applicant assessing whether past research fits the broad Machine Design / Manufacturing advertisement. For example, an applicant might explain a research topic using the terminology of mechanical design methodology, manufacturing processes or manufacturing-related experimentation if it genuinely describes their work. The department page does not make a specific software package, laboratory method, publication count, teaching certificate, industrial experience duration or machine-operation skill mandatory in this advertisement. The actual eligibility gate remains the official doctoral-status and specialization wording above.

In other words, the departmental research profile explains the academic environment, but must not be treated as an unpublished screening rubric.

💰 Remuneration, allowances and practical benefits

The remuneration wording is conditional: a selected candidate may be paid ₹65,000 consolidated per month, or as per the institute rule. This is not an unconditional assurance that every appointee will receive a fixed ₹65,000 in hand, nor is it a 7th-CPC basic pay level. No higher salary slab, incremental increase, annual package or performance-based amount is supplied in this notice.

ComponentPosition in the 20 November announcement
Consolidated monthly remunerationMay be ₹65,000, or as per institute rules
Other emoluments and separate allowancesNot applicable under the stated terms
Medical reimbursementNot applicable
Pension and gratuityNot applicable
Shared hotel/hostel accommodationProvided free if required, on a shared basis
TA/DA for interview attendanceNot provided

The accommodation clause concerns shared accommodation on an if-required basis; it is not a cash housing allowance or an assurance of private housing. Candidates considering travel or relocation to Sohra should weigh the short engagement period and the advertised absence of separate allowances against their own circumstances. The institution has not specified a recruitment fee in this announcement; a fee amount or an explicit zero-fee exemption cannot be invented from that silence.

📅 Application, interview and contract timeline

MilestoneDate / statusCandidate implication
Official recruitment notice20 November 2026Use this announcement, not an earlier Guest Faculty intake
Application by departmental email13 December 2026, 11:59 p.m.Send the prescribed application and required scans before the stated deadline
Departmental scrutinyDate not announcedOnly complete applications will be considered for shortlisting
Proposed interview18 December 2026 — tentativeMonitor the email address entered on the application; schedule can change
Required joining, if selected25 January 2027Selected applicant must be ready to join on this date
Advertised end of engagement4 June 2027Temporary engagement has a stated end date

Two different kinds of dates: The 13 December at 11:59 p.m. deadline is an actual email application cut-off. The 18 December interview is explicitly tentative, not an unchangeable confirmed reporting order. The notice does not specify an interview reporting hour, venue/online mode, written-test date or presentation schedule. No unannounced stage should be treated as booked.

📄 How to submit the application — exact email route

  1. Open the NIT Meghalaya Guest Faculty advertisement dated 20 November 2026, and locate its Application Form link. Use the form associated with this Mechanical Engineering advertisement, not an older guest-faculty form from a different recruitment cycle.
  2. Fill the application form fully and accurately. Enter a valid, active email address because the institute explicitly says all correspondence will be sent to the email address provided by the candidate.
  3. Prepare the filled application form in PDF format. Send it with the scanned copies of original documents specified in that application form and published papers, if any, for verification. The announcement requires PDF format for the filled form; it does not explicitly say that every attachment must be merged into a single PDF, nor does it give a universal file-size limit.
  4. Email the application to hod.me.office@nitm.ac.in. The subject line must be exactly: Application for Guest Faculty in Mechanical Engineering – January 2027.
  5. Complete the email submission by 13 December 2026, 11:59 p.m. Retain your submission and attachments for reference and ensure that files remain legible.

Application-form access: The institute's recruitment page carries an Application Form attachment. If the Application Form attachment does not open, use the published departmental email address to request the correct current-cycle form rather than substituting an older form.

The notice identifies email application as the route. It does not instruct applicants to pay through a third-party payment gateway, submit a separate online recruitment-registration fee, or send hard copies by post. Do not infer additional steps from NIT Meghalaya's other faculty or non-teaching advertisements.

🧾 What the institute needs to assess your file

The instruction explicitly mentions the filled application form, scanned copies of original documents identified on that form and published papers, if any. The following is a pre-submission review, not an invented compulsory annexure list:

Review pointWhy it matters
Correct advertisement and Mechanical Engineering postPrevents using a form or subject line from a different cycle
Ph.D. awarded or thesis-submission status recorded accuratelyDistinguishes the two alternatives explicitly allowed by the notice
Specialization shown as Machine Design / Manufacturing where supported by recordsConnects the candidate's doctoral area to the advertised requirement
All fields on the actual attached form completedInstitute states incomplete forms will not be considered for shortlisting
Form submitted as PDF; prescribed document scans includedThese are specified submission requirements
Publications included if anyThe official notice uses a conditional publication requirement, not a mandatory publication count
Valid candidate email addressAll correspondence is through that email address
Exact email subject and timely dispatchThese are expressly specified by the recruiting department

Confirm the document list in the current application form itself. The dated notice does not specify self-attestation requirements, photograph dimensions, scan resolution, an NOC format, certificate formats or an enclosure order.

Selection process: scrutiny first, interview later

The announced route is scrutiny of completed applications followed by an interview call to shortlisted candidates. Shortlisting depends on the institute's requirements and norms, and the authority expressly reserves the right to accept or reject any or all applications without assigning a reason.

The employer also says that additional details, including a possible written test or presentation, will be communicated afterwards. This is not a declaration of an already scheduled written examination or a published examination syllabus. No fixed marks pattern, negative marking, ranking formula or interview weightage has been announced. Candidates should await any individual communication or official update before relying on a particular assessment format.

There is no TA/DA for attending the interview. Because the tentative interview date can change, applicants should confirm later instructions rather than making non-refundable travel arrangements on the basis of the tentative date alone. The notice gives no confirmed venue, reporting time or interview-mode information at this stage.

Who should evaluate this vacancy carefully?

Applicants with an awarded Ph.D. in Machine Design / Manufacturing: Check that your actual doctoral specialization can be substantiated; the number of posts is only two and an interview call is not guaranteed by possession of the essential qualification.

Applicants who have submitted their Ph.D. thesis: This advertisement explicitly recognises thesis submission as an alternative status. State your academic stage accurately and retain documentation; do not describe an unawarded Ph.D. as already conferred.

Applicants requiring a permanent academic post: This is a temporary Guest Faculty engagement with a defined appointment period, not a regular faculty advertisement. Pay is consolidated/conditional; separate allowances, pension and gratuity are not provided in the advertised terms.

Applicants whose availability is limited: Selection carries a requirement to be ready to join 25 January 2027, with an advertised engagement ending 4 June 2027. Consider that fixed period before sending an application.

Frequently asked questions

Are there two vacancies each for Machine Design and Manufacturing? No. The employer advertises two in total under the combined expression Machine Design / Manufacturing. It does not allocate separate numbers to the two subjects.

Is an awarded Ph.D. compulsory, or can a thesis-submitted candidate apply? The essential requirement explicitly states Ph.D. completed or thesis submitted. The candidate's disciplinary fit and evidence remain important to shortlisting.

Is ₹65,000 an assured take-home salary? No. The notice states that the candidate may be paid ₹65,000 consolidated monthly or as per institute rules, and rules out other listed benefits.

Must I apply through an online recruitment portal? The advertised application route is email to hod.me.office@nitm.ac.in with the subject stated above. The institute's general recruitment portals are not presented as the submission route for this notice.

Is an interview guaranteed for every applicant? No. The institute will scrutinise applications and may shortlist candidates under its own requirements and norms; incomplete applications are excluded from shortlisting.

Is the interview definitely on 18 December? No. The employer explicitly calls this date tentative and says it may change.

Will I be reimbursed for coming to the interview? No. The advertisement says interview TA/DA will not be provided.

Is an application fee specified? The 20 November advertisement does not state one. That is different from an explicit fee-exemption notification.

Official recruitment and academic references

ContractualOnsiteHigher Education
Sarkari Sapna

Post-wise Vacancies

Open a post to view qualification, experience, age, salary, location, responsibilities and post-specific instructions.

2 vacancies

Guest Faculty — Mechanical Engineering (Machine Design / Manufacturing)

Qualification: Essential: Ph.D. completed OR Ph.D. thesis submitted in Machine Design / Manufacturing (Mechanical Engineering). This is one combined advert covering 2 positions. The notice does not give minimum qualifying percentages or a specific mandatory experience duration; incomplete applications will not be shortlisted.
Age: Description: The specific Guest Faculty announcement does not state a numerical minimum or maximum age.
Pay: ₹65,000 consolidated per month may be paid, or as per institute rules
Educational qualification

Essential: Ph.D. completed OR Ph.D. thesis submitted in Machine Design / Manufacturing (Mechanical Engineering). This is one combined advert covering 2 positions. The notice does not give minimum qualifying percentages or a specific mandatory experience duration; incomplete applications will not be shortlisted.

Experience

Required: No · Description: The 20 November 2026 notice states no mandatory numerical experience duration. The institute may shortlist as per its requirements and norms.

Job location
Sohra, Meghalaya, India
Skills
Machine Design or Manufacturing specialization within Mechanical Engineering
Post description

Mechanical Engineering Guest Faculty — 2 advertised positions

Institute: National Institute of Technology Meghalaya, Saitsohpen, Sohra, East Khasi Hills, Meghalaya. Specialization: Machine Design / Manufacturing. Advertisement: NITMGH/ES/G-F/ME/2026-27/1568, dated 20 November 2026. Employment: Temporary/contractual Guest Faculty from 25 January to 4 June 2027.

How these two vacancies are distributed

Both positions are included in one Mechanical Engineering specialization line, rather than two post codes. The notice does not state one vacancy in Machine Design and one in Manufacturing, nor does it give a social-category reservation breakup. The total advertised strength is 2, and candidates should not infer an allocation that is absent from the employer's announcement.

Exact essential qualification

The educational condition is Ph.D. completed OR doctoral thesis submitted in the advertised Machine Design / Manufacturing specialization. These are alternate stages of the doctorate, not two degrees that must both be presented. Documentary proof should accurately establish the candidate's current status. Merely being enrolled in a doctoral programme, without completion or thesis submission, is not a separately advertised alternative.

There is no numerical age ceiling, exact mandatory experience duration, percentage threshold or NET/GATE score in the dated announcement. Incomplete applications will be excluded from shortlisting. The institute may apply its screening requirements and norms when determining whom to invite.

Academic area and actual role

The employer offers the position within the Department of Mechanical Engineering. The institute's official department profile describes activity in mechanical design, manufacturing processes, advanced manufacturing and related research, including relevant laboratories. This provides subject context, not a newly imposed requirement for a particular software tool, certification, number of publications or laboratory procedure. The notice itself does not publish teaching hours, named courses, a detailed duty schedule or a research-output target for this short Guest Faculty engagement.

Pay and appointment limits

Pay may be ₹65,000 consolidated per month, or as per institute rules; the amount is not represented as a fixed guaranteed basic salary. Other emoluments, medical reimbursement, allowances, pension and gratuity are excluded. Shared hotel/hostel accommodation may be made available free if required. Selected candidates must be ready to join on 25 January 2027, and the advertised tenure ends 4 June 2027.

Scrutiny, interview and any additional assessment

A completed prescribed form and supporting evidence are assessed first; eligible applicants are not automatically guaranteed an interview. The proposed date is 18 December 2026, but it is tentative. The employer may communicate details of an additional written test or presentation; no exam timetable, syllabus or marks pattern is specified in this original notice. No TA/DA is provided for attending interview, and the authority reserves the right to accept or reject applications in accordance with its published conditions.

Submit the correct form by email

Download the current-cycle application form from the official recruitment notice, fill it completely and submit the filled form as a PDF, with scans of original documents mentioned in that form and published papers, if any. Email hod.me.office@nitm.ac.in using the subject Application for Guest Faculty in Mechanical Engineering – January 2027 by 13 December 2026, 11:59 p.m. All correspondence is to the valid email supplied by the applicant. If the Application Form link is unavailable, request the current form through the official departmental contact rather than substituting an older recruitment-cycle form. The notice does not require all attachments to be merged into a single PDF.

Duties

Temporary academic Guest Faculty engagement in Mechanical Engineering at NIT Meghalaya. Individual courses, hours, classes and specific assigned duties are not described in the 20 November 2026 notice.

Post-specific instructions
  • Use the application form attached to NIT Meghalaya advertisement NITMGH/ES/G-F/ME/2026-27/1568 dated 20 November 2026; do not substitute a prior cycle form.
  • Submit the duly filled application form in PDF format, with scans of original documents specified in the institute form and published paper(s), if any.
  • Send to hod.me.office@nitm.ac.in; email subject exactly: Application for Guest Faculty in Mechanical Engineering – January 2027
  • Email deadline is 13 December 2026 at 11:59 p.m.; provide a correct active email address for all subsequent communication.
  • The interview date of 18 December 2026 is tentative and subject to change; only shortlisted candidates will be called after scrutiny.
  • If selected, be prepared to join on 25 January 2027 for the engagement ending 4 June 2027.
  • No TA/DA is payable for attending the interview. Incomplete application forms will not be considered for shortlisting.
Reservation note

The official announcement gives 2 Guest Faculty positions under Machine Design / Manufacturing without a category-wise reservation roster or a specialization-wise numerical split.

Selection stages for this post
Application Scrutiny And ShortlistingShortlisted Candidate Interview
Sarkari Sapna

Eligibility & Qualification

Recruitment-level qualifications and eligibility rules. Post-specific conditions are also shown inside each vacancy card.

Completed Ph.D. OR thesis submitted in advertised discipline

The advertised essential qualification covers two alternative doctoral statuses: Ph.D. completed or doctoral thesis submitted. The specialization must fit the Mechanical Engineering requirement of Machine Design / Manufacturing.

Submission of complete prescribed application form

Submit the prescribed form in PDF with the scanned original documents specified in that form and published papers if any, by departmental email. Incomplete applications will not be considered for shortlisting.

Availability to join 25 January 2027 if selected

The employer requires selected candidates to be ready to join 25 January 2027 for the advertised temporary appointment through 4 June 2027.

Sarkari Sapna

Age Limit & Relaxation

Recruitment-level age criteria. Post-specific age conditions remain visible inside each vacancy card.

Minimum age
Not specified
Maximum age
Not specified
Reference date
Not specified
Age relaxation: The 20 November 2026 institute announcement does not specify numerical age limits or an age-relaxation table.
Sarkari Sapna

Salary & Pay Scale

Post-wise salary, stipend or pay-matrix information.

Guest Faculty — Mechanical Engineering (Machine Design / Manufacturing)
May be ₹65,000 consolidated monthly, or as per institute rules
May be ₹65,000 consolidated monthly, or as per institute rules

Conditional consolidated remuneration: may be ₹65,000 per month or as per the institute rule. No distinct guaranteed pay-band values; no additional allowances, medical reimbursement, pension or gratuity. Shared accommodation provided free if required.

Sarkari Sapna

Selection Process

Selection stages in the order configured for this recruitment.

1

Application Scrutiny and Shortlisting

Applications reviewed after email submission. Incomplete forms are not considered for shortlisting. NIT Meghalaya determines shortlisting according to institute needs and norms; merely possessing an eligible Ph.D. status does not guarantee an interview call.

2

Shortlisted Candidate Interview

Interview proposed tentatively for 18 December 2026 and subject to change. Additional test/presentation details may be communicated later if applicable; neither an exam schedule nor scheme is announced. No TA/DA for interview travel.

Sarkari Sapna

Important Dates

Application and recruitment milestones published with this job.

Notification
Dated official NIT Meghalaya Guest Faculty advertisement
20 Nov 2026

Advt. NITMGH/ES/G-F/ME/2026-27/1568 printed with Date: 20/11/2026.

Application End
Email application closing at 11:59 PM IST
13 Dec 2026

Send form in PDF and scanned supporting documents to hod.me.office@nitm.ac.in.

Other
Interview proposed for 18 December; tentative and subject to change
18 Dec 2026

The employer explicitly says the interview will be held tentatively on 18 December 2026 and may change.

Other
Contract appointment begins; selected candidate must be ready to join
25 Jan 2027

Purely temporary / contractual engagement from this date.

Other
Advertised final day of Guest Faculty contract
04 Jun 2027

The official advertised period is 25 January 2027 to 04 June 2027.

Sarkari Sapna

Official Links & Resources

Application links, notification documents and verified sources in one place.

Sarkari Sapna profile photo
Posted by
Sarkari Sapna

सरकारी नौकरी, भर्ती, परीक्षा और career information को सरल, सटीक और उपयोगी रूप में समझाने पर केंद्रित

View profile